A built-in oven’s cabinet is built around the oven, not the other way around. So choose the oven model first. Then plan the wall oven cabinet around that model’s own published sheet: its opening, its support, its power and its airflow. The way to decide is to settle the model with your designer before the cabinets are ordered.
Why does the order matter? Say the cabinets are ordered around a generic oven size, and the oven is picked later. Its cutout might not match. Its junction box might land in the wrong spot, or it might need a different circuit. That can mean cabinet modifications, a pricier fix or a different oven after the cabinets are built.
What Does a Wall Oven Cabinet Have to Provide?
An oven maker says a wall oven needs a cabinet or a built-in wall with adequate structural support, cutout dimensions, clearances and ventilation requirements. The reason is room. The oven needs space for its cooking cavity and for its electronic parts. So the cabinet’s job goes past holding a box in the wall.
That point comes from one oven maker’s installation guide, and the guide covers power too. It says the junction box’s location must match the electrical requirements in the appliance’s manual. It says the box should be 3 inches above or below the cabinet cutout, and that its steps vary by model, so your model’s installation guide decides. If you can’t see a box, the guide says it may sit behind the drywall of the cutout.
Power changes by model as well. The same maker says some models require a 30-amp circuit, while others require a 40-amp circuit. So what the wall behind the oven’s cabinet has to supply depends on the model. You can’t plan that until you’ve picked one.
Put together, the oven cabinet is a package: an opening, a base that holds the oven, the power and the airflow. As a general rule, your designer can list each one from the model’s own sheet. Your builder and electrician then confirm the structure and the wiring, because that work is theirs.
Which Opening Do Single, Double and Combo Ovens Need?
Each type of wall oven asks for its own opening. The same maker notes that the sizes it lists are cutout sizes. The oven itself is slightly smaller, so it can fit inside. That’s why the cabinet gets built to your model’s cutout and not to a guess, whichever type you pick.
The same maker spells out heights in its wall oven sizing guide. It says a double wall oven is typically just over 50 inches tall. It says a wall oven microwave combo generally runs 40 to 44 inches tall. It also says individual models vary, so check the manufacturer’s cutout dimensions or installation guide before you choose an oven.
The guide adds a note about doubles. The maker says many double models have two equally sized ovens. So replacing an older double may call for a change to the cutout’s height.
That’s worth knowing even in a full remodel. The tall cabinet that holds a double or a combo is a different build from a single’s. As a general rule, settle the oven type with your designer first, ahead of the cabinet order. The pieces above and below it, such as storage, a drawer or a microwave, can then follow from the opening.
Can a Wall Oven Go Under the Counter?
Sometimes. The same maker says a single wall oven can often fit under a countertop. But the oven’s height and the counter’s height don’t line up, so the maker says you may end up with extra space above or below the oven. That gap needs a plan.
The maker gives typical figures. It says the oven is typically 27 to 28 inches tall, and kitchen countertops typically 36 inches. Your model’s installation guide gives its real size, and the difference has to go somewhere.
That leftover space is a design question. What fills it? How will you reach into the oven, and where does the cook stand while it’s in use? As a general rule, talk these through with your designer before you choose an under-counter plan.
Is it right for your kitchen? It can be, if the extra space has a good use and the layout works for the person cooking. If it doesn’t, a tall oven cabinet may suit the plan instead. It’s a tradeoff to weigh early, while the drawings can still change.
Oven cabinets sit in the same run as the base and upper cabinets. So the depth of that run is part of the same plan. If you’re checking it, read why uppers and bases differ in depth.
How to Plan a Wall Oven Cabinet Before the Cabinets Are Ordered
Planning the oven’s cabinet comes down to order. Settle the oven, then let everything else follow. Bring these points to the people planning and building your kitchen.
- Choose the oven model before the cabinet order is final.
- Ask your designer to work from that model’s published cutout dimensions or installation guide.
- Ask your builder and electrician to confirm the base that will hold the oven.
- Ask which circuit the model needs and where the junction box will fall.
- Ask what sits above, below and beside the opening, and how the opening is trimmed.
- Keep the model’s sheet with your plans in case the model changes.
Picture a kitchen where the cabinets were ordered around a generic opening. The oven chosen afterward has a different cutout. Its junction box needs to sit somewhere else. At that point, the cabinet, the wiring or the oven has to change.
What if the model changes after the cabinets are ordered? The maker’s sizing guide says an opening that’s too small will require cabinet modifications and can be a pricier option. It says an opening an inch or so larger than the oven needs may be filled with a trim kit. So changing the oven late can be the costly move.
Kitchen Design Partners offers kitchen and bath design. Its kitchen design services include consultation, design planning, custom cabinetry selection and coordination with your builder or installer. So the oven question can be settled in the kitchen design, while the cabinets can still change.
Frequently Asked Questions About Wall Oven Cabinets
Does a wall oven have to be in a cabinet?
It needs a cabinet or a built-in wall. One oven maker says the oven needs adequate structural support, cutout dimensions, clearances and ventilation requirements. That’s because it needs room for the cooking cavity and the oven’s electronic parts. Either way, the structure around it should be planned for the model you choose, and your builder confirms that structure.
What happens if the oven doesn’t fit the opening?
It depends on which way it misses. One oven maker says an opening that’s too small will require cabinet modifications and can be a pricier option. If the opening is an inch or so larger than the oven needs, the maker says a trim kit may help fill the gap. The time to find out is before the cabinets are ordered, not after.
How do you measure for a wall oven?
For an existing opening, one oven maker says to measure the cutout’s height, depth and width. Then compare them with the cutout requirements of the oven you plan to buy. The maker adds that individual models vary, so the manufacturer’s cutout dimensions or installation guide decide the fit. For cabinets that aren’t ordered yet, your designer works from the chosen model’s sheet instead.
Do you need an electrician for a wall oven?
One oven maker says it depends on how comfortable you are working with electricity. The maker strongly recommends hiring an electrician if you haven’t done it before or if significant electrical work is required. It also says installation cost can depend on cabinet modifications and electrical work. Wiring is your electrician’s or builder’s work, not your kitchen designer’s.
Will Kitchen Design Partners help me plan a wall oven cabinet?
Yes. Kitchen Design Partners offers kitchen and bath design services, including consultation, design planning, custom cabinetry selection and coordination with your builder or installer. The first step is to schedule an appointment. The team discusses your needs, tours the showroom with you and starts developing a customized design plan. Your builder or contractor handles construction and installation.
Choose the Oven Before You Order the Cabinets
Kitchen Design Partners specializes in kitchen and bath design, custom and semi-custom cabinetry, countertops and tile, and guides each choice in the right order.
As a general rule, the time to get an oven cabinet right is once the oven model is known and before the cabinets are ordered. After that, a change can mean rework.
You’re welcome to visit the Northbrook showroom, where you can explore different kitchen layouts, styles and materials.
Bring your kitchen plans or the oven you’re considering, and schedule a design consultation to talk through your wall oven cabinet and the oven that will go in it.